Easy Steps to Install Landscape Timbers

Sep 24, 2012 by

Landscape timbers are used to raise flowerbeds, to give your landscape a warm look or to make a readymade garden. Use some compost and topsoil; plant some carrots, taproot, radishes, parsnips and anything you can think of inside this garden and see it blooming with flowers and fruits.

Landscape Timbers

Landscape Timbers

You can use landscaping timbers in every method which you can imagine. There is wide range of timbers nowadays, and you may even purchase little logs with a flat base or manufacture it at the own. Even though they look natural, actually, they’re made from plywood; hence they are a reused product. Nevertheless, people prefer to cut the actual timber instead of buying the landscaping timbers.

Real wood landscaping timber isn’t chemically handled, while ply board is. Consequently, real wooden timber lasts only for seven or eight many years but they are less dangerous and healthier, especially if you will find children in your own home. Plywood fire logs receive more chemical substances to keep going longer. But they are not good for health owing to their chemical treatment.

There are many ways to incorporate landscape timbers in your garden design. These rot-resistant timbers withstand natural elements without showing indications of decay and form sturdy and functional garden objects. Use the versatile building material to edge your lawn or flower garden, secure lengths in the ground to form a natural stairway that makes it easy to walk up or down a slope, or stack lengths to form a raised planter or bed. The durable timbers blend with any garden design to boost appeal and aesthetics.

Installing landscape timbers could be slightly challenging, but the results they bring to your home and garden are amazing. They make an excellent border and appear great when used for flower gardens. Landscape timbers can be purchased at your local lumber supply store, or perhaps a department store that carries wood products. They are generally inexpensive, and if properly treated through the supplier, can last for years in your lawn or garden. Follow these few steps to set up your landscape timbers, and improve the look and functionality of the lawn and garden.

Easy steps to set up landscape timber

Step 1: Preparation

Measure the perimeter of the area inside your garden that you wish to enclose using the timber edging. Buy enough edging out of your local garden store to line the perimeter from the garden twice. Make sure to purchase all-weather timbers since they will be exposed to the elements. Cut them down to size according to your measurements using the saw. Make sure that you’re wearing your protective gear when doing this.

Step 2: Dig a Trench

Dig a trench around the area about 6 inches deep and about 2 inches wider that the timber edging that you simply purchased. Once you’ve dug your trench, make use of your shovel to smooth the walls and also the bottom. Use the gravel and fill the trench around 2 inches. This will serve as the foundation of the landscape timber. Make sure that the gravel is evenly spread at the bottom of the trench.

Easy Steps to Install Landscape Timbers

Easy Steps to Install Landscape Timbers

Step 3: Laying the Timber Edging

Lay out the timber edging over the gravel and make sure that they are even by using the level. Lay them down in such a way that the corners are gathered in a clockwise order. They must be also planted flat over the gravel in order to ensure stability and steadiness. Place another layer of timber over the first ones that you laid down and now the corners should join together inside a counter-clockwise order. This avoids the timber from being exactly on top of each other.

Step 4: Joining the Timber Edging Together

Get the drill and drill some holes through both layers from the landscape timber edging. Drill holes on all corners and more holes every four feet. Once you’ve made all of the holes, drive the 12-inch spikes in to the holes, but make sure that the diameter from the spikes is larger than the holes that you simply made. Use the sledgehammer to nail within the spikes. Keep on hammering the spike down before the heads are level using the surface of the wood and nothing is protruding.

Step 5: Finishing

Now that the edging is safe, there will be gaps around the wood. Fill these gaps with more gravel and pour a level distribution over the perimeter from the enclosed area of the garden. Once done and before clearing the area, just re-check the gaps. Once each one is filled properly, clear any excess gravel that could have been poured over the timber edging. With this done, you have successfully installed the landscape timber edging.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.